Is one of your hydraulic pumps starting to fail, is it making a lot of noise, or is it not working at all?
Does a machine not work properly because a proportional valve does not regulate as it used to?
Do your hydraulic cylinders leak? Does the oil get too hot?
These are just a few examples of our customers’ daily problems. They trust us because they know we can repair the faulty component and if not, we will provide a solution. And now so do you.
We repair hydraulic pumps from any manufacturer. Of course, with original spare parts. Send us your pump and we will quickly provide you with a no-obligation quotation. If you accept the repair, the pump will be tested on our test bench before it is returned to you so that you can be sure that when you fit it to the machine it will work first time. We test and adjust it. If you need a report to document the repair or for traceability of your equipment, let us know and you will receive it with the pump.
We also repair any proportional valve or servovalve, be it from an injection moulding machine, a press or a test bench. And whatever the manufacturer. Send it to us, we will test it on our bench and check it to give you a repair estimate. Once accepted, we will return it to you repaired, tested and with a report.
If you have a leaking cylinder, send it to us. We will repair it so that it works perfectly again. Because the first thing we do is to test it to check the fault and above all to detect if there is any fault that you have not initially observed. Then we dismantle it, thoroughly check the condition of the internal parts and check the tolerances. We carry out all the necessary repairs (change of gaskets, lapping, grinding, chrome plating and machining) and we assemble it. Finally, we test it on our bench and send it to you. It’s as easy as that.
By the way, if we find something that can be improved in the design, we will let you know so that you can decide what to do.
Have you noticed that your machine does not cycle properly? Are there important pressure variations? It is possible that an accumulator is discharged or broken. We can send a technician to check it, but you can also send us the accumulator, we will check it and correct the charge. If it is broken, we have spare parts to repair it on the spot.
At ihBER we have our own test benches for checking repairs to pumps, proportional valves and hydraulic cylinders. In this way we can check if the hydraulic repairs and installations we carry out are correct in our own facilities, which allows us to guarantee that there will be no subsequent incidents with a reliability of 99.3% in our hydraulic repairs.
If you have any doubts about what type of hydraulic part we can repair or the brands we work with, don’t hesitate to ask us.Contact us
- Original spare parts
- Same day repair service
- Own test benches
- Repair reports
- More than 35 years of experience
- High level of satisfaction: 99.3% reliability